12 mm x 21 mm x 5 mm ZEN 61801 Deep ball bearings

A2:23.4 mm; A:8.7 mm; S:7.5 mm; d1:37.4 mm; B1:30.9 mm; C0:7.88 kN; N:8,7mm; Designation of housing:PFT205-; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:ES205G2;

B:22 mm; T max.:200 °C; A1:10 mm; d:12 mm; Weight:0.39 kg; Z:27 mm; C0:4.78 kN; J:63.5 mm; S:6 mm; e:19 mm;

T max.:100 °C; A3:3.5 mm; T min.:-20 °C; SW:5.56 mm; d:49.21 mm; C:62 kN; G:M6x1; Weight:3.38 kg; B:61 mm; H:140 mm;

D:100 mm; Characteristic rolling element frequency, BSF:16.14 Hz; ra max:0.6 mm; Characteristic outer ring frequency, BPF0:12.67 Hz; Radial clearance class:CN; rs min:0.6 mm; Da max:96 mm; Nlim (grease):6,000 rpm; d:80 mm; Static load, C0:13.3 kN;

T max.:100 °C; H2:70 mm; E:18 mm; Adapter sleeve reference:HLK2305; H1:15 mm; Designation of bearing:LK205G2H; T min.:-20 °C; B1:28 mm; H:36.5 mm; L1:25 mm;

Manufacturing Plant Location:Rogersville, TN; Bearing Locking Device:Concentric Clamp Col; Anti-Rotation Pin:Yes; Max Bearing Speed:7500 rpm; Flinger Material:Steel; Seal Type:Shield; Bearing Family:D-Lock Ball Bearing; Bearing Series:204 Series; d:20.0000 mm; UPC:782475991884;

A2:42 mm; Designation of housing:T212-; T max.:100 °C; N1:32 mm; H:146 mm; B1:77.7 mm; d1:82 mm; G:M6x1; Designation of bearing:EX212-39G2T04; S:30.9 mm;

Retainer Material:Nylon; Bearing Locking Device:Setscrew; Seal Type:Single Lip; Manufacturing Plant Location:Rogersville, TN; Housing Type:2 Bolt Flange; Expansion Type:Non-Expansion; Bearing Duty:Normal Duty; Anti-Rotation Pin:Yes; Housing Material:Stainless Steel; Bearing Bore Shape:Round;

C0:11.2 kN; S:15.9 mm; G:M6x1; Recommended tightening torque for set screw:5.5 Nm; C1:5 mm; d:30 mm; T max.:100 °C; C:19 mm; D:62 mm; T min.:-20 °C;

c:16 mm; A2:20 mm; A1:30 mm; B:60 mm; W2:66.5 mm; d:35 mm; fixing bolts G:M12; initial grease quantity:85 Volume_cmc; W:198.5 mm; W1:160.5 mm;

G:M10x1; L1:91 mm; A1:51 mm; d1:105 mm; C0:54.2 kN; Weight:9.44 kg; H:88.9 mm; L:292 mm; s1:39 mm; A:78 mm;

J:110 mm; N:14mm; C0:15.2 kN; C:25.7 kN; A:34 mm; B:42.9 mm; Recommended tightening torque for set screw:8 Nm; S:17.5 mm; d:36.51 mm; A4:26 mm;

L3:95 mm; Designation of open end cover:SCOU211-32; N1:25 mm; s1:27.8 mm; Z:76.8 mm; A1:22 mm; SW:4.76 mm; T min.:-40 °C; C:43.55 kN; H1:130 mm;

C0:6.65 kN; B:31 mm; S:12.7 mm; s1:15.5 mm; Weight:0.57 kg; Designation of bearing:UC204G2L3; L:100 mm; H3:62; J:78 mm; G:M6x1;

G:M10x1; A1:83 mm; H:150 mm; L1:135 mm; C0:178 kN; S:46 mm; H2:300 mm; T min.:-20 °C; N1:55 mm; A:140 mm;